Product display
200 series thread locking sealant
Keywords: 200 series thread locking sealant
|
222 thread locking agent Low strength, thixotropic viscosity Used on most metal surfaces, easy to disassemble. For M2 ~ M12 thread locking and sealing. It is ideal for fasteners ≤ 1/4 "(6mm) or smaller threads, which have certain lubricity and can accurately achieve locking strength. |
242 thread locking agent General purpose, medium strength, thixotropic viscosity. For locking and sealing of M6 ~ M20 thread. It is a removable thread locking agent. Has a certain degree of lubricity, and can accurately achieve the locking strength. |
243 thread locking agent Oil resistance/medium strength. Fast curing, can be used on inert surfaces, good oil content, easy to disassemble. Can be used on work surfaces with slight oil stains. For locking and sealing of threads below M20. |
|
262 thread locking agent High strength. Suitable for most metal surfaces. Thixotropic viscosity, good chemical resistance. For locking and sealing of threads below M20. Is a permanent locking thread locking agent, in poor chemical environmental conditions Excellent rust and corrosion resistance. |
263 thread locking agent High strength, low viscosity. For permanent locking and sealing of threads up to M36. |
271 thread locking adhesive High strength, low viscosity. For permanent locking and sealing of threads up to M36. |
|
272 thread locking agent High temperature/high strength. High temperature resistance up to 230 ℃. Can be used for cylinder head double-head thread locking. The inclusion of uncleaned fasteners for most surfaces can be achieved to provide rapid curing. Recommended for bolts up to M36. A heating tool is required for removal. |
277 thread locking agent High strength, high viscosity. Excellent chemical resistance. For permanent locking and sealing of threads up to M36. It can prevent the thread from rusting and corrosion, and it needs to be heated and disassembled with tools during disassembly. |
290 thread locking agent Permeability/medium strength, low viscosity. Fast curing. Used for locking and sealing of assembled M2 ~ M12 threads. It can also be used for sealing micropores such as welds and castings (below 0.10mm). To prevent the thread from rusting and corroding, it is necessary to disassemble it with local heating tools during disassembly. |
|
295 thread locking agent High strength, medium viscosity. Suitable for inert surfaces. |
||
Technical performance of grain locking adhesive product
|
Product code |
Packing specification (bottle) |
Typical use |
Color |
Viscosity (mpa.s) |
Average disassembly torque (N.m) |
Failure moment (N.m) |
Max. filling gap (mm) |
Temperature range (℃) |
Curing speed (initial solid/full solid)(min/h) |
Oily |
|
222 |
10ml |
M2-M12 |
Purple |
1200~5000 |
4 |
6 |
0.13 |
-54~149 |
20/24 |
- |
|
242 |
10ml |
M6-M20 |
Blue |
1200~6000 |
4.8 |
12 |
0.13 |
-54~149 |
20/24 |
- |
|
243 |
10ml |
With slight |
Blue |
2250~-12000 |
7 |
20 |
0.13 |
-54~149 |
20/24 |
Yes |
|
262 |
10ml |
Bolt below M20 |
Red |
1800~5000 |
22 |
22 |
0.13 |
-54~149 |
20/24 |
- |
|
263 |
10ml |
Permanent locking type M36 |
Red |
400~600 |
30 |
25 |
0.13 |
-54~149 |
10/24 |
|
|
271 |
10ml |
Permanent locking type |
Red |
500 |
31 |
25 |
0.13 |
-54~149 |
20/24 |
- |
|
272 |
10ml |
High temperature resistant permanent |
Red |
9500 |
25 |
23 |
0.25 |
-54~230 |
30/24 |
- |
|
277 |
10ml |
Permanent locking type |
Red |
7000 |
32 |
32 |
0.25 |
-54~149 |
30/24 |
- |
|
290 |
10ml |
Can be penetrated after assembly |
Green |
12 |
29 |
10 |
0.10 |
-54~149 |
20/24 |
- |
|
295 |
10ml |
More for inert materials |
Green |
1200~1800 |
35 |
30 |
0.13 |
-54~149 |
15/24 |
- |
What if you have more needs?
Leave your demand information online and we will reply to you in time!
Product Center
Contact Information
Mailbox:jinhuifirst@163.com
Address:Room 221, Floor 2, No.1, North Annex, 9-Qishan Road, Yantai Development Zone