600 series of cylindrical parts holding agent

603 cylindrical parts retention agent oil. It is a general-purpose high-strength holding glue with oil and other pollutants. Seal and hold the cylindrical part assembly with a maximum filling radial clearance of 0.13mm. At the beginning of curing within 20 minutes, it can prevent micro vibration wear and corrosion of metal mating parts.. 609 cylindrical parts holding agent low viscosity, high strength. Suitable for transition, interference or clearance fit. Retaining keys with shafts, bearings, small motor rotor shafts, bushings. Repair worn hole-shaft fittings or out-of-tolerance parts. The most ideal radial filling gap is 0.13mm or less, which can provide 21 in 24 hours.

Category:Product Center

Keywords: 600 series of cylindrical parts holding agent

E-mail: jinhuifirst@163.com

Message Contacts

Product Details

603 cylindrical part holding agent Oily. It is a general-purpose high-strength holding glue with oil and other pollutants. Seal and hold the cylindrical part assembly with a maximum filling radial clearance of 0.13mm. At the beginning of curing within 20 minutes, it can prevent micro vibration wear and corrosion of metal mating parts..	609 cylindrical part holding agent Low viscosity, high strength. Suitable for transition, interference or clearance fit. Retaining keys with shafts, bearings, small motor rotor shafts, bushings. Repair worn hole-shaft fittings or out-of-tolerance parts. The most ideal radial filling gap is 0.13mm or less, which can provide a shear strength of 21MPa at 24 hours and can withstand temperatures up to 149 ℃. It can be easily matched with parts of different metal materials.	620 cylindrical part holding agent High temperature resistance, high viscosity, high strength, no flow. Retaining valve sleeve, injection molding core sleeve, valve sleeve, cylinder sleeve, keyway, etc. Locking and holding the cylindrical fitting to a gap of 0.3mm diameter provides a shear strength of more than 19.0N/m㎡ for steel, and can withstand high temperatures to 232 ℃. Can prevent metal micro vibration wear and corrosion, sealing to prevent leakage.
638 cylindrical part holding agent High strength, the highest strength holding glue. Used for dynamic load or periodic conditions, can hold the bearing fit with a clearance of 0.25mm. Cured in 5 minutes.	641 cylindrical part holding agent Medium strength, easy to disassemble. Used to hold cylindrical fittings, especially suitable for frequent disassembly occasions, suitable for bearing assembly. The maximum filling gap is less than 0.25mm. 10~30 minutes to achieve the initial curing.	648 cylindrical part holding agent High strength, fast curing. It is recommended to use where the continuous operating temperature is 175°C. Fill the gap to 0.15mm. Initial curing within 5 minutes.
660 cylindrical part holding agent Pressure Fit Repair. For maintenance, fast curing, filling large gaps, high strength, high viscosity (paste). Repair shafts, end caps, keys, keyways, bearings, bushings. Repairs worn machine parts and can restore the correct fit of mating parts. The maximum filling radial clearance is 0.5mm.	680 cylindrical part holding agent High strength, medium viscosity. Suitable for clearance fit or transition fit. Retaining bushings, pulleys, gears, rotors. Repair holes, shaft fittings, out-of-tolerance parts. The steel provided a shear strength of greater than 20.7N/mm2 after 24 hours. The maximum filling radial clearance is 0.25mm. Initial curing within 10 minutes.
Technical performance: Packing specification: 50ML/bottle, 250ML/bottle Color: Green Viscosity: 1250 mPa.s Shear strength: 21 N/mm2 Maximum filling gap: 0.25mm Temperature range:-54-149 ℃ Initial consolidation speed: 10min

Technical performance of cylindrical parts holding adhesive products

Products Code	Packing specification (bottle)	Typical use	Color	Viscosity (mpa.s)	Shear strength (N/mm2)	Max. radial clearance (mm)	Temperature range (℃)	Curing speed (initial solid/full solid) (min/h)
603	50ml 250ml	High strength holding maximum radial Fill gap 0.13mm	Green	125	≥ 21	0.13	-54～149	20/24
609	50ml 250ml	High-strength retention of parts suitable for clearance transitions and interference fits	Green	125	≥16	0.13	-54～149	10/24
620	50ml 250ml	High temperature resistance	Green	8500	≥ 19	0.25	-54～232	1h/24
638	50ml 250ml	High strength	Green	2500	≥ 31	0.25	-54～149	5/24
641	50ml 250ml	medium strength	Yellow	thixotropy 1950	≥ 11.5	0.25	-54～149	30/24
648	50ml 250ml	High strength, fast curing	Green	550	≥ 26	0.15	-54～175	5/24
660	50ml 250ml	Suitable for repairing worn Mechanical parts	silver gray	paste	≥ 17	0.50	-54～149	10/24
680	50ml 250ml	High-strength holding for slip-fit parts	Green	1250	≥ 21	0.25	-54～149	10/24