Special adhesive series

88-1 petroleum special adhesive anaerobic type, medium strength, medium viscosity, good chemical resistance, non-corrosive. Maximum filling gap 0.15mm, easy to disassemble. It is used for permanent locking and sealing of oil pumping pipe and sucker rod thread. 88-2 petroleum special adhesive anaerobic type, high strength, medium viscosity, good chemical resistance, non-corrosive. Maximum filling gap 0.15mm, easy to disassemble. It is used for permanent locking and sealing of oil pumping pipe and sucker rod thread in oil field with depth of 1500 m -3000 m. Use. 88-3 petroleum special adhesive anaerobic type, ultra-high strength, medium viscosity, good chemical resistance, non-corrosive. Maximum fill gap 0.

Pre-applied dry film thread locking sealant

200 pre-coated thread locking compound medium strength. Can reliably seal and fix phosphated or oiled threaded fasteners. 201 pre-coated thread locking adhesive medium low strength. It has reliable locking and sealing effect. 204 pre-coated thread locking glue high strength, effectively prevent thread loosening, leakage and corrosion. Can work stably on the plating surface. For galvanized or stainless steel bolts. 503 pre-coated dry film thread sealant white water-based pre-coated sealant, suitable for manual application. Can be used for plating joints. 513 pre-coated dry film thread sealant low viscosity, suitable for manual gluing. Instant sealing. 516 pre-applied dry film thread sealant

800 series industrial repair agent

811 iron repair agent two-component, mastic, universal. It is suitable for repairing pores, sand holes and cracks in iron castings. It can be especially used for the repair of finishing mating surface and the recovery of dimensional deviation. Can be machined after curing. 812 steel repair agent two-component, mastic, high comprehensive mechanical properties. High strength, high reliability, suitable for small gap or aperture below all kinds of casting porosity, sand hole, crack repair. It can also be used for wear repair of machine parts and can be machined after curing. 813 aluminum repair agent two-component, mastic, aluminum as a filler polymer aluminum repair material. Suitable for all kinds of aluminum materials and aluminum casting pores, sand

700 Series Auxiliary Products

755 cleaning agent surface cleaning agent, low toxicity, non-flammable, super safety. Suitable for manual work on-site role. Can be used as a surface pretreatment agent for all adhesives, which can remove all surface oil stains without leaving any traces. 790 gasket remover can remove glue, oil, paint, carbon deposits and other surface residues, no corrosion to aluminum, but should not be used on plastics, linoleum and synthetic fibers. 7649 anaerobic adhesive accelerator universal curing accelerator. It can be used in the following situations: the temperature is lower than 10 ℃, the metal surface activity is low, the filling gap is large, or the curing needs to be accelerated. 68DA thread loosening agent super permeability,